In November 2025, the Shenzhen Special Cable Industry Association led the development of the world’s first group standard for humanoid robot cables, T/SZRCA 011—2025. The standard was released in November 2025 and came into effect in December 2025. It was showcased at a conference in Shenzhen in March 2026. The standard specifies seven mandatory dynamic tests, including U-shaped cable chain tests and three-dimensional torsion tests.
Around the same time, another industry association in Shenzhen released the Technical Requirements for Wiring Harness Assemblies Used in Embodied Intelligence Robots (T/AIIA 021—2026), covering both connectors and wiring harness assemblies.
Previously, the cable chain standard T/SZRCA 009—2024 had already established demanding durability requirements. Its highest level requires 50 million U-shaped bending cycles and 10 million three-dimensional torsion cycles.
For comparison, automotive wiring harnesses in moving areas typically require durability of more than 100,000 cycles, with high-end applications reaching 300,000 cycles. The automotive industry standard QC/T 29106 regulates crimping, sealing, temperature and humidity resistance, and salt spray testing. Industrial robot drag-chain cables typically require 2–5 million cycles. For humanoid robot joints, the research threshold is 5–10 million cycles, while 0.2 mm ultra-fine coaxial cables for dexterous hands target 20 million cycles. The total weight of the wiring harness is expected to account for no more than 2% of the robot’s weight.
According to LeadLeo Research, a humanoid robot uses approximately 34 wiring harnesses, with an average price of about $30 per harness. The total cost is approximately $1,020, accounting for 10–12% of the bill of materials (BOM). If the price of each harness decreases by $3 annually, the total cost could fall to approximately $510 by 2030. The industry’s estimated total cost per robot ranges from $600 to $1,050, placing the current estimate of $1,020 near the upper end. By comparison, wiring harnesses for industrial robots cost approximately $150–$225, while a complete automotive wiring harness costs approximately $450–$900.
In 2025, China’s humanoid robot wiring harness market was valued at approximately $51 million. LeadLeo forecasts that the market will reach approximately $2.55 billion by 2030, representing a compound annual growth rate (CAGR) of 118.6%.
According to information released during the Ministry of Industry and Information Technology’s standards-related activities, China’s humanoid robot shipments exceeded 40,000 units in the first half of 2026, accounting for 97% of global shipments. Full-year production is expected to exceed 100,000 units. At an estimated wiring harness cost of $1,020 per robot, production of 100,000 robots would correspond to a wiring harness market worth approximately $102 million—less than Huguang’s revenue in a single month.
The Supplier Landscape
Tier 1: Aptiv, Sumitomo Electric, Fujikura, Yazaki, and Amphenol. These companies are already involved in overseas supply chains for Tesla and Boston Dynamics.
Tier 2: Luxshare, Wanma, Xinhongye, and Electric Connector Technology. These companies have entered the supply chains of domestic humanoid robot manufacturers, including UBTECH, Unitree, and Agibot.
Tier 3: Recodeal, WEFLY Electronic, and Yonggui Electric. These companies are mainly at the sample-validation stage.
Most domestic suppliers are still engaged in framework cooperation or sample testing, and their mass-production revenue cannot yet be quantified from public information. Tianhai Electronics announced in the third quarter that it had received a small-batch order from a leading domestic embodied-intelligence robotics customer. However, the order remains small and has made a limited contribution to the company’s current-period performance.
Opportunities for Automotive Wiring Harness Manufacturers
Humanoid robot manufacturers are often strong in algorithms and structural design, but they may lack established systems for large-scale delivery and batch-to-batch consistency. Automotive wiring harness manufacturers, on the other hand, have spent more than 20 years developing quality management systems based on IATF 16949, PPAP, MSA, and SPC.
Equipment can be purchased, but the experience accumulated through years of manufacturing is difficult to replicate.
There are three major challenges.
1. Material and process barriers
The requirements include 0.05 mm fine copper stranding, ultra-thin fluoroplastic extrusion, and three-dimensional braided shielding. Japanese suppliers have advantages in these areas. Chinese manufacturers have made breakthroughs in mid-range products, but gaps remain in high-end applications.
2. Product iteration
Automotive platforms typically undergo major changes every five years, whereas the structural design of humanoid robots may change every three months.
3. Low volumes versus the traditional cost model
An automotive program may require hundreds of thousands of units annually, while humanoid robot demand may only reach thousands of units per year. Frequent production-line changeovers and tooling amortization make it difficult for traditional automotive wiring harness manufacturers to maintain profitability using their existing quotation models.
The likely winners will be companies that take one of two approaches: either invest in ultra-fine wires and high-flexibility specialty materials, using small-batch orders to develop their manufacturing processes; or build capabilities in high-speed connectors and high-speed wiring harnesses for high-frequency signal transmission.
Simply copying automotive wiring harness designs is likely to result in projects getting stuck at the sample-validation stage.
According to LeadLeo, the market is expected to scale up in 2026–2027, with mass adoption beginning from 2028 onward. The supply chain structure is likely to become more established during this period.
As standards are introduced, the market is shifting from a situation in which almost anyone can participate to one in which suppliers must meet specific standards to qualify. The current period therefore offers a lower-cost entry window than 2028.